Join the Blanchard Team..
Apply Now
Well stimulation operations in the oilfield are complex and demanding. The 3512C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3512C (HD) engines, with ratings: 1603-1864 bkW (2250-2500 bhp) @ 1900 rpm meet IMO Tier II, China Stage III, U.S. EPA Marine Tier 2, and U.S. EPA Non-road Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
Request a QuoteEmissionsNon-current EPA Tier 2 and China Stage III
Displacement58.6l
AspirationTurbocharged-Aftercooled
Flywheel and Flywheel HousingSAE No. 0
Flywheel Teeth151
Stroke8.5in
Bore6.7in
Length113.8in
Width64.2in
Height86.1in
Weight14145lb
Standard
Heavy-duty air cleaners (dual element/service indicator)
Four center-mounted turbochargers
Standard
Cat® ADEM A3 ECU — LH
With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)
Optional
Local speed throttle control
Throttle position sensors
Governor conversion
Standard
Separate Circuit SCAC system
Torque converter connections
Thermostats and housing, jacket and separate circuit water pump, gear-driven centrifugal
Optional
Coolant regulator conversion
Water level switch gauge
Coolant level sensors and coolant conditioner
Standard
Land well service engine
Optional
Flexible exhaust fitting
Elbows, flange, exhaust adapters
Manifold and mufflers
Standard
Flywheel, SAE No. 0, 151 teeth
Flywheel housing, SAE No. 0
Standard
Primary fuel filter
Fuel priming pump
Fuel filter — RH spin-on type
Fuel transfer pump
Electronically controlled unit injectors
Standard
No standard instrumentation
Optional, remote instrumentation available
Service meter
Optional
Remote panel display and remote cylinder temperature display
Gauges and instrument panels
Standard
Crankcase breather — top mounted
Oil cooler
Oil filler and dipstick — LH
Oil pump
Oil filter — RH spin-on type
Rear sump oil pan — 250-hour change interval
Oil pan drain valve — 1" NPT female connection
Fumes disposal
Optional
Oil pans and filters
Deep sump oil pan and front sump pan
Standard
Trunion front support
Standard
Accessory drive — lower LH
Front housing — two-sided
Optional
Front crankshaft adapter
Flywheel stub shaft
Standard
ADEM A3 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
Emergency stop logic inputs provided at 40-pin customer interface connection
Dual air inlet shutoff
Oil pressure monitor
Optional
Sensors
Shutoff controls
Standard
Paint — Cat yellow
Vibration damper and guard
Lifting eyes
Optional
Charging alternators
Optional
Flexible fuel lines
Water/fuel separator
Fuel level switch
Optional
Air starting motors
Electric starting motors
Hydraulic starter
Ether starting aids
Battery sets — 24V
Battery cable and battery rack
Complete this form to get a quote on the equipment you are interested in.
