Join the Blanchard Team..
Apply Now
Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require compliance with the highest emission standards in well service applications such as workover rigs, pump skids, acidizing units, cementing units, and hydraulic power units.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.C13 ACERT engines with ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about Emissions describes the particular rating’s emissions technology. For more information about emissions certification, please contact your local Cat dealer.
Request a QuoteMaximum Rating520BHP
Displacement762.8in³
Minimum Rating385BHP
AspirationTurbocharged-Aftercooled
Flywheel and Flywheel HousingSAE 1
Flywheel Teeth113
Stroke6.18in
Bore5.12in
EmissionsEPA Tier 4 Final and EU Stage IV
Length47.3in
Width39.9in
Height44.7in
Weight1976lb
Standard
Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
Standard
Cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
Standard
Mid-mount turbocharged system with front and rear exhaust configurations
Standard
SAE No. 1 flywheel housing; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
Standard
MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
Standard
Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
Standard
Paint: Cat yellow
Complete this form to get a quote on the equipment you are interested in.
