Join the Blanchard Team..
Apply Now
Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C18 ACERT engines include, pump skids, nitrogen units, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C18 ACERT engines, with ratings: 429-522 bkW (575-700 bhp) @ 1800-2100 rpm, meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Ratings: 570-597 bkW (765-800 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards. Ratings below 560 bkW (751 bhp) are available using U.S. EPA and EU Flexibility, and for other global regulated and non-regulated areas. Ratings above 560 bkW (751 bhp are available using U.S. EPA Flexibility and for other global regulated and non-regulated areas.
Request a QuoteMaximum Rating800BHP
Displacement1100in³
Minimum Rating575BHP
Governor and ProtectionADEM A3
AspirationTurbocharged-Aftercooled
Flywheel and Flywheel HousingSAE No. 0 or SAE No. 1
Flywheel Teeth136 (SAE No. 0), 113 (SAE No. 1)
Rotation from Flywheel EndCounterclockwise
Stroke7.2in
Bore5.71in
EmissionsEPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Length54.7in
Width36.2in
Height49.5in
Weight2807lb
Cooling System13.2gal (US)
Standard
Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), hose connection
Dual turbocharger, front and rear inlet 127.0 mm (5 in.), hose connection
Optional
Air cleaners
Air lines
Standard
Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring and protection system (speed, temperature, pressure)
J1939 Broadcast (diagnostic, engine status, and control)
Standard
Thermostats and housing — outlet vertical
Jacket water pump — gear-driven, centrifuga
RH front water pump inlet
All plugs/fittings are STOR for lines gp water
Optional
Radiator
Fan drive with radiator packages
Fan height instructions
Vee belts
Aftercooler lines with Caterpillar installed radiator
Single turbo configuration rear-facing exhaust
Single turbo configuration rear-facing exhaust
Aftercoooler lines
Suction fan adapters
Blower fan adapter
Blower fan
Suction fan
Fan belt
Coolant level sensor
Dry charge coolant conditioners
Standard
Exhaust manifold — dry
Single turbo — front-facing turbo exhaust, full marmon connection, maximum load 10 kg for direct connection to turbo
Dual turbo — exhaust elbow, dry 203 mm (8 in)
Optional
Turbo exhaust connection
Flexible fittings
Elbows, flange, clamp, pipes
Exhaust adapters
Manifold
Mufflers
Standard
See Mandatory Options
Standard
Electronic unit injector
Fuel filter, secondary, mid-mount (LH 2 micron high performance)
Fuel transfer pump, LH front
Fuel priming pump, LH mid-mount
Fuel sample valve, mounted on fuel filter base.
Standard
Crankcase breather — rear valve cover
Oil cooler — RH (dual)
Oil filter — RH, LH
Oil pan — front sump
Oil dipstick — LH front
Oil pump
Optional
Oil pans
Drain and cover
Oil level gauge
Remote oil filters
Oil filters
Lubricating oils
Standard
Front support (shipping only)
Optional
Structural steel base
Front and rear engine support
Standard
Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width
Hydraulic pump drive, SAE A, 11-tooth
Optional
Rear enclosed clutches
Hydraulic pump drives
Hydraulics gear pumps
Clutch supports
Crankshaft pulleys
Standard
Vibration damper
Paint — Cat yellow
Lifting eyes
Automatic variable timing, electronic
Electronic installation kit 70-pin connector (connectors, pins, sockets)
Standard
Throttle position sensor
Single turbo only — exhaust system (front or rear)
Flywheel housing or rear PTO
Primary filter/water separator
Optional
Air compressor governor
Expansion chambers
Optional
Charging alternators
Alternator mountings
Alternator wiring
Circuit breakers and mountings
Alternator belt guard
Optional
Flexible fuel lines
Fuel filter location
Fuel cooler
Water separator
Optional
Gauges and instrument panels
Optional
Air shutoff
Optional
Air starting motors
Air pressure regulator
Air silencer
Start switch
Electric starting motors — 12V, 24V
Battery sets - 24V
Battery cable and rack
Starting aids
Optional
Transmission water lines
Complete this form to get a quote on the equipment you are interested in.
